1/2″ – 500′ coil – RED Certified Non-Barrier PEX Tubing Htg/Plbg/Potable Water

This listing is for 500′ of 1/2″ Non Oxygen Barrier PEX Tubing.

BHS PEX tubing is made to the following specifications.

• OD .625
• ID .485
• Wall Thickness .075
• Weight per foot .05
• ASTM 876/877
• NSF Certified for Potable Water
• Not to be installed in Direct Sunlight
• Made to ASTM specifications.
• Rated at 100 psi at 180 degrees.
• Rated at 80 psi at 200 degrees.
• Rated at 160 psi at 73 degrees.
• Type B PEX is made using the silane method (water bath).

BHS PEX tubing is connected in 2 different ways.

Crimp fittings are the most effective way of connecting. This is done with a barbed fitting and a copper crimp ring. The ring is compressed with the use of a crimp ring tool.

This method is the cheapest and best way to a connection and is the least susceptible to leaks down the road.

You can also use push-fit fittings. They are great for a quick repair, or a small installation project. They are however more expensive and more susceptible to leaks down the road.

Do Not use PEX tubing for any of the following applications:

• Anywhere the temperature could reach 230 F or more.
• Not for use with steam.
• Keep out of direct sunlight.
• Keep away from areas that are exposed to a flame or heat source.
• Not to be used with liquids -40 F or below

***We will ship to Alaska/Hawaii…please call for shipping quote*** 

Barcode: 689807254603